Dell PowerEdge FX2 Dell PowerEdge FX2 and FX2s Enclosure Owners Manual - Page 133
cfgIPv6Enable (Read or Write), cfgIPv6AutoConfig (Read/Write), cfgIPv6Address
View all Dell PowerEdge FX2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
Use this object with the config or getconfig subcommands. To use this object property for CMC, you must have Chassis Configuration Administrator privilege. NOTE: To apply this setting to iDRAC, use the -m option. The following sections provide information about the objects in the cfgIPv6LanNetworking group. cfgIPv6Enable (Read or Write) Description Enables or disables CMC IPv6 stack. Legal Values Default • 1 (TRUE) • 0 (FALSE) 0 cfgIPv6AutoConfig (Read/Write) Description Enables or disables the IPv6 Auto Configuration option. Legal Values NOTE: If this value is set to 0, the CMC disables auto configuration and statically assigns IPv6 addresses. If this value is set to 1, the CMC obtains address and route information using stateless auto configuration and DHCPv6. NOTE: The CMC uses its MAC address for its DUID (DUID-LL) when communicating with a DHCPv6 server. • 1 (TRUE) • 0 (FALSE) Default 1 cfgIPv6Address Description Legal Values Default Assigns a static IPv6 address to the CMC. This property is used only if cfgIPv6AutoConfig is set to 0 (false). A string representing a valid IPv6 address. For example, 2001:DB8:1234:5678:9ABC:DE11:C00C:BEEF :: cfgIPv6PrefixLength (Read/Write) Description Specifies the prefix length for IPv6 address. 133