Dell PowerEdge FX2 Dell PowerEdge FX2 and FX2s Enclosure Owners Manual - Page 84
sslresetcfg, testemail, Output, Example, Description, Chassis Configuration, Administrator, Synopsis
View all Dell PowerEdge FX2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Output Example NOTE: If the -f option is not specified, the filename defaults to sslcsr in your current directory. If no options are specified, a CSR is generated and downloaded to the local file system as sslcsr by default. The -g option cannot be used with the -s option, and the -f option can only be used with the -g option. The sslcsrgen -s subcommand returns one of the following status codes: • CSR was generated successfully. • CSR does not exist. racadm sslcsrgen -s or racadm sslcsrgen -g -f c:\csr\csrtest.txt NOTE: Before a CSR can be generated, the CSR fields must be configured in the RACADM cfgRacSecurity group. For example: racadm config -g cfgRacSecurity -o cfgRacSecCsrCommonName MyCompany NOTE: In telnet/ssh console, you can only generate and not download the CSR file. sslresetcfg Description Synopsis Example Restores the web-server certificate to factory default and restarts webserver. The certificate takes effect 30 seconds after the command is entered. To use this subcommand, you must have the Chassis Configuration Administrator privilege for CMC. racadm sslresetcfg $ racadm sslresetcfg Certificate generated successfully and webserver restarted. testemail Description Synopsis Input Output Sends a test e-mail from CMC to a specified destination. Prior to executing the test e-mail command, make sure that the SMTP server is configured and the specified index in the RACADM cfgEmailAlert group is enabled and configured properly. racadm testemail -i -i - Specifies the index of the e-mail alert to test. Success: Test e-mail sent successfully Failure: Unable to send test e-mail 84