Dell PowerEdge FX2 Dell PowerEdge FX2 and FX2s Enclosure Owners Manual - Page 92
cfgDNSDomainNameFromDHCP (Read/Write), cfgDNSDomainName (Read or Write), Example, Description
View all Dell PowerEdge FX2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Example racadm config -g cfgLanNetworking -o cfgNicVLanPriority 7 cfgDNSDomainNameFromDHCP (Read/Write) Description Specifies that the DNS domain name should be assigned from the network DHCP server. Legal Values • 1 (TRUE) • 0 (FALSE) Default 0 This property is used only if cfgNicUseDhcp is set to 1 (true), or if both cfgCurrentIPv6Enabled and cfgIPv6AutoConfig are set to 1 (true). The CMC can obtain its DNS domain name from either a DHCP or DHCPv6 server, if all of the following properties are set to 1 (true): • cfgNicIPv4Enable • cfgNicUseDhcp • cfgCurrentIPv6Enabled • cfgIPv6AutoConfig • cfgDNSDomainNameFromDHCP • cfgDNSDomainName (Read/Write) The network administrator must make sure that these DHCP servers are configured to provide the same DNS domain name to the CMC, otherwise the domain name becomes unpredictable. cfgDNSDomainName (Read or Write) Description In the DNS domain name, parameter is only valid if cfgDNSDomainNameFromDHCP is set to 0 (FALSE). Legal Values Default A string of up to 254 ASCII characters. At least one of the characters must be alphabetic. Characters are restricted to alphanumeric, '-', and '.'. NOTE: Microsoft Active Directory only supports Fully Qualified Domain Names (FQDN) of 64 bytes or fewer. 92