Dell PowerEdge FX2 Dell PowerEdge FX2 and FX2s Enclosure Owners Manual - Page 36
getsleduplinkstatus, getflexaddr
View all Dell PowerEdge FX2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
server-4 Not Present None N/A None N/A getdcinfo -n server-1 server-2 server-3 server-4 Present Not Present Not Present Present None None None None None None None Broadcom M5708t getsleduplinkstatus Description Synopsis Examples Displays multi-node sled network switch uplink status. racadm getsleduplinkstatus racadm getsleduplinkstatus Sled No : 2 Port No A1 Link Status A2 Link Status = 3 = Up = Down Port No A1 Link Status A2 Link Status = 4 = Up = Up Sled No : 3 Port No A1 Link Status A2 Link Status = 5 = Up = Down Port No A1 Link Status A2 Link Status = 4 = Up = Up getflexaddr Description Displays enabled or disabled status for the entire chassis. If used with -i, the command displays MACs/WWN on a per-slot-basis. The decoder values in the Type column indicate the protocols of the network cards: • 0- Unsupported • 1- ISCSI • 2- FCoE-FIP • 3- iSCSI/FCoE-FIP 36