Dell PowerEdge FX2 Dell PowerEdge FX2 and FX2s Enclosure Owners Manual - Page 139
cfgNetTuningNicSpeed, cfgNetTuningNicAutoneg (Read/Write), Description, Legal Values, Default, Example
View all Dell PowerEdge FX2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
cfgNetTuningNicSpeed Description Specifies the speed for the CMC NIC. This property is used only if cfgNetTuningNicAutoNeg is set to 0. Legal Values 10, 100, or 1000 Default 100 cfgNetTuningNicAutoneg (Read/Write) Description Enables autonegotiation of physical link speed and duplex. If enabled, autonegotiation takes priority over other values set in this group. Legal Values • 0 = Auto Negotiation is Disabled • 1 = Auto Negotiation is Enabled Default 1 Example racadm getconfig -g cfgNetTuning cfgNetTuningNicSpeed=100 cfgNetTuningNicFullDuplex=1 cfgNetTuningNicMtu=1500 cfgNetTuningNicAutoneg=1 cfgNetTuningNicFullDuplex (Read/Write) Description Specifies the duplex setting for the RAC or CMC NIC. This property is used only if the cfgNetTuningNicAutoNeg is set to 0 (disabled). Legal Values • 0 (Half Duplex) • 1 (Full Duplex) Default 1 cfgNetTuningNicMtu (Read/Write) Description The size in bytes of the maximum transmission unit used by CMC NIC. Legal Values 576 - 1500 Default 1500 NOTE: IPv6 requires a minimum MTU of 1280. If IPv6 is enabled, and cfgNetTuningMtu is set to a lower value, the CMC uses an MTU of 1280. 139