Dell PowerEdge FX2 Dell PowerEdge FN I/O Aggregator Configuration Guide 9.6(0 - Page 170

Enabling SCP and SSH Secure shell (SSH) is a protocol for secure remote login and other secure network services over an insecure network. Dell Networking OS is compatible with SSH versions 1.5 and 2, in both the client and server modes. SSH sessions are encrypted and use authentication. SSH is enabled by default. For details about the command syntax, refer to the Security chapter in the Dell Networking OS Command Line Interface Reference Guide. Dell Networking OS SCP, which is a remote file copy program that works with SSH. NOTE: The Windows-based WinSCP client software is not supported for secure copying between a PC and a Dell Networking OS-based system. Unix-based SCP client software is supported. To use the SSH client, use the following command. • Open an SSH connection and specify the hostname, username, port number,encryption cipher,HMAC algorithm and version of the SSH client. EXEC Privilege mode ssh {hostname} [-l username | -p port-number | -v {1 | 2}| -c encryption cipher | -m HMAC algorithm hostname is the IP address or host name of the remote device. Enter an IPv4 or IPv6 address in dotted decimal format (A.B.C.D). • Configure the Dell Networking system as an SCP/SSH server. CONFIGURATION mode ip ssh server {enable | port port-number} | version | vrf} • Configure the Dell Networking system as an SSH server that uses only version 1 or 2. CONFIGURATION mode ip ssh server version {1|2} • Display SSH connection information. EXEC Privilege mode show ip ssh Specifying an SSH Version The following example uses the ip ssh server version 2 command to enable SSH version 2 and the show ip ssh command to confirm the setting. Dell(conf)#ip ssh server version 2 Dell(conf)#do show ip ssh SSH server : disabled. SSH server version : v2. Password Authentication : enabled. Hostbased Authentication : disabled. RSA Authentication : disabled. To disable SSH server functions, use the no ip ssh server enable command. 170 Security