Dell PowerEdge FX2 Dell PowerEdge FN I/O Aggregator Configuration Guide 9.6(0 - Page 52

Field Description • Internally propagated: ETS configuration parameters were received from configuration source. ETS DCBx Oper status Reason State Machine Type Operational status of ETS configuration on local port: match or mismatch. Reason displayed when the DCBx operational status for ETS on a port is down. Type of state machine used for DCBx exchanges of ETS parameters: • Feature: for legacy DCBx versions • Asymmetric: for an IEEE version Conf TLV Tx Status Reco TLV Tx Status Input Conf TLV pkts, Output Conf TLV pkts, Error Conf TLV pkts Input Reco TLV pkts, Output Reco TLV pkts, Error Reco TLV pkts Status of ETS Configuration TLV advertisements: enabled or disabled. Status of ETS Recommendation TLV advertisements: enabled or disabled. Number of ETS Configuration TLVs received and transmitted, and number of ETS Error Configuration TLVs received. Number of ETS Recommendation TLVs received and transmitted, and number of ETS Error Recommendation TLVs received. Example of the show stack-unit all stack-ports all pfc details Command Dell# show stack-unit all stack-ports all pfc details stack unit 0 stack-port all Admin mode is On Admin is enabled, Priority list is 4-5 Local is enabled, Priority list is 4-5 Link Delay 45556 pause quantum 0 Pause Tx pkts, 0 Pause Rx pkts stack unit 1 stack-port all Admin mode is On Admin is enabled, Priority list is 4-5 Local is enabled, Priority list is 4-5 Link Delay 45556 pause quantum 0 Pause Tx pkts, 0 Pause Rx pkts Example of the show stack-unit all stack-ports all ets details Command Dell# show stack-unit all stack-ports all ets details Stack unit 0 stack port all Max Supported TC Groups is 4 Number of Traffic Classes is 1 Admin mode is on 52 Data Center Bridging (DCB)