Dell PowerEdge FX2 Dell PowerEdge FN I/O Aggregator Configuration Guide 9.6(0 - Page 230
Example of Specifying a TACACS+ Server Host, seconds, command multiple
View all Dell PowerEdge FX2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 230 highlights
TACACS+ Remote Authentication When configuring a TACACS+ server host, you can set different communication parameters, such as the key password. Example of Specifying a TACACS+ Server Host Dell(conf)# Dell(conf)#aaa authentication login tacacsmethod tacacs+ Dell(conf)#aaa authentication exec tacacsauthorization tacacs+ Dell(conf)#tacacs-server host 25.1.1.2 key Force Dell(conf)# Dell(conf)#line vty 0 9 Dell(config-line-vty)#login authentication tacacsmethod Dell(config-line-vty)#end Specifying a TACACS+ Server Host To specify a TACACS+ server host and configure its communication parameters, use the following command. • Enter the host name or IP address of the TACACS+ server host. CONFIGURATION mode tacacs-server host {hostname | ip-address} [port port-number] [timeout seconds] [key key] Configure the optional communication parameters for the specific host: - port port-number: the range is from 0 to 65535. Enter a TCP port number. The default is 49. - timeout seconds: the range is from 0 to 1000. Default is 10 seconds. - key key: enter a string for the key. The key can be up to 42 characters long. This key must match a key configured on the TACACS+ server host. This parameter must be the last parameter you configure. If you do not configure these optional parameters, the default global values are applied. Example of Connecting with a TACACS+ Server Host To specify multiple TACACS+ server hosts, configure the tacacs-server host command multiple times. If you configure multiple TACACS+ server hosts, Dell Networking OS attempts to connect with them in the order in which they were configured. To view the TACACS+ configuration, use the show running-config tacacs+ command in EXEC Privilege mode. To delete a TACACS+ server host, use the no tacacs-server host {hostname | ip-address} command. freebsd2# telnet 2200:2200:2200:2200:2200::2202 Trying 2200:2200:2200:2200:2200::2202... Connected to 2200:2200:2200:2200:2200::2202. Escape character is '^]'. Login: admin Password: Dell# Dell# 230 PMUX Mode of the IO Aggregator