Dell PowerEdge FX2 Dell PowerEdge FN I/O Aggregator Configuration Guide 9.6(0 - Page 265
show fc switch Command Example, Fibre Channel forwarder MAC: MAC address of Aggregator with the FCF
View all Dell PowerEdge FX2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 265 highlights
Field FCF MAC Fabric Intf FCoE VLAN Fabric Map Enode WWPN Enode WWNN FCoE MAC FC-ID LoginMethod Secs State Description Fibre Channel forwarder MAC: MAC address of Aggregator with the FCF interface. Fabric-facing Aggregator with the Fibre Channel port (slot/port) on which FCoE traffic is transmitted to the specified fabric. ID of the dedicated VLAN used to transmit FCoE traffic from a server CNA to a fabric and configured on both the server-facing Aggregator with the server CNA port. Name of the FCoE map containing the FCoE/FC configuration parameters for the server CNA-fabric connection. Worldwide port name of the server CNA port. Worldwide node name of the server CNA. Fabric-provided MAC address (FPMA). The FPMA consists of the FCMAP value in the FCoE map and the FC-ID provided by the fabric after a successful FLOGI. In the FPMA, the most significant bytes are the FCMAP; the least significant bytes are the FC-ID. FC port ID provided by the fabric. Method used by the server CNA to log in to the fabric; for example, FLOGI or FDISC. Number of seconds that the fabric connection is up. Status of the fabric connection: logged in. show fc switch Command Example Dell# show fc switch Switch Mode : NPG Switch WWN : 10:00:5c:f9:dd:ef:10:c0 Dell# Table 27. show fc switch Command Description Field Description Switch Mode Fibre Channel mode of operation of an Aggregator. Default: NPG (configured as an NPIV proxy gateway). Switch WWN Factory-assigned worldwide node (WWN) name of the Aggregator. The Aggregator WWN name is not user-configurable. NPIV Proxy Gateway 265