Dell PowerEdge FX2 Dell PowerEdge FN I/O Aggregator Configuration Guide 9.6(0 - Page 221

Example of Viewing LLDP Global Configurations R1(conf)#protocol lldp R1(conf-lldp)#show config ! protocol lldp advertise dot3-tlv max-frame-size advertise management-tlv system-capabilities system-description hello 10 no disable R1(conf-lldp)# Example of Viewing LLDP Interface Configurations R1(conf-lldp)#exit R1(conf)#interface tengigabitethernet 0/3 R1(conf-if-te-0/3)#show config ! interface tengigabitEthernet 0/3 switchport no shutdown R1(conf-if-te-0/3)#protocol lldp R1(conf-if-te-0/3-lldp)#show config ! protocol lldp R1(conf-if-te-0/3-lldp)# Viewing Information Advertised by Adjacent LLDP Agents To view brief information about adjacent devices or to view all the information that neighbors are advertising, use the following commands. • Display brief information about adjacent devices. show lldp neighbors • Display all of the information that neighbors are advertising. show lldp neighbors detail Example of Viewing Brief Information Advertised by Neighbors Dell(conf-if-te-0/3-lldp)#end Dell (conf-if-te-0/3)#do show lldp neighbors Loc PortID Rem Host Name Rem Port Id Rem Chassis Id Te 0/1 - TenGigabitEthernet 0/5 00:01:e8:05:40:46 Te 0/2 - TenGigabitEthernet 0/6 00:01:e8:05:40:46 Dell (conf-if-te-0/3)# Example of Viewing Details Advertised by Neighbors Dell#show lldp neighbors detail Local Interface Te 0/4 has 1 neighbor Total Frames Out: 6547 Total Frames In: 4136 Total Neighbor information Age outs: 0 Total Frames Discarded: 0 Total In Error Frames: 0 Total Unrecognized TLVs: 0 Total TLVs Discarded: 0 Next packet will be sent after 7 seconds PMUX Mode of the IO Aggregator 221