Dell PowerEdge FX2 Dell PowerEdge FN I/O Aggregator Configuration Guide 9.6(0 - Page 92
Output 00.00 Mbits/sec
View all Dell PowerEdge FX2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
0 packets, 0 bytes 0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts 0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte pkts 0 Multicasts, 0 Broadcasts 0 runts, 0 giants, 0 throttles 0 CRC, 0 overrun, 0 discarded Output Statistics: 0 packets, 0 bytes, 0 underruns 0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts 0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte pkts 0 Multicasts, 0 Broadcasts, 0 Unicasts 0 throttles, 0 discarded, 0 collisions, 0 wreddrops Rate info (interval 299 seconds): Input 00.00 Mbits/sec, 0 packets/sec, 0.00% of line-rate Output 00.00 Mbits/sec, 0 packets/sec, 0.00% of line-rate Time since last interface status change: 05:29:16 To view only configured interfaces use the show interfaces configured command in EXEC Privilege mode. To determine which physical interfaces are available, use the show running-config command in EXEC mode. This command displays all physical interfaces available on the switch, which is as shown in the following example. Dell#show running-config Current Configuration ... ! Version 1-0(0-4) ! Last configuration change at Tue Mar 25 04:50:51 2014 by default ! boot system stack-unit 0 primary tftp://10.11.8.12/dv-ci-stomp-tc-1-a1 ! redundancy auto-synchronize full redundancy disable-auto-reboot stack-unit ! logging coredump stack-unit all ! hostname Dell ! enable password 7 b125455cf679b208e79b910e85789edf ! username admin password 7 1d28e9f33f99cf5c ! enable restricted 7 e0f78bb16023c392 ! vlt domain 1 ! stack-unit 0 provision PE-FN-410S-IOA --More-- 92 Interfaces