Dell PowerEdge MX7000 EMC OpenManage Enterprise-Modular Edition Version 1.00.1 - Page 38
sys log alerts, Destination Address
![]() |
View all Dell PowerEdge MX7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
To configure SNMP alerts, perform the following steps: 1 From the main menu, select Application Settings > Alerts. 2 Click SNMP Configuration. 3 Select Enable to enable the configuration. 4 Enter the Destination Address. You can configure up to four SNMP destinations. 5 Select the SNMP Version. The available SNMP versions are: • SNMP V1 • SNMP V2 NOTE: For MX9116n or MX5108n IOMs, only SNMP V2, is supported. 6 Enter the Community String. When you configure the community string for SNMP V1, by default, the community string is appended with |common|FibreChannel11. 7 Select the Port Number and click Send to test the SNMP trap. Configuring sys log alerts You can configure up to four sys log destinations. To configure system log alerts, perform the following steps: 1 Click Application Settings > Alerts > Syslog Configuration. 2 Select the Enabled check box corresponding to the required server. 3 Enter the destination address or the hostname. 4 Enter the port number. 38 Logging in to OME-Modular
![](/manual_guide/products/dell-poweredge-mx7000-emc-openmanage-enterprisemodular-edition-version-10010-chassis-users-guide-7e894a4/38.png)