Dell PowerEdge R210 II Owner's Manual - Page 55
Removing a Filler Panel, Removing and Installing a Filler Panel
View all Dell PowerEdge R210 II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Removing a Filler Panel 1 Turn off the system and attached peripherals, and disconnect the system from the electrical outlet. 2 Open the system. See "Opening the System" on page 50. 3 If installed, remove the front bezel. See "Removing the Front Bezel" on page 49. 4 Pull the filler panel away from the chassis. Figure 3-5. Removing and Installing a Filler Panel 1 1 filler panel Installing a Filler Panel 1 Slide the filler panel into the bay until it clicks into place. See Figure 3-5. 2 Replace the front bezel. See "Installing the Front Bezel" on page 49. 3 Close the system. See "Closing the System" on page 51. Installing System Components 55
Installing System Components
55
Removing a Filler Panel
1
Turn off the system and attached peripherals, and disconnect the system
from the electrical outlet.
2
Open the system. See "Opening the System" on page 50.
3
If installed, remove the front bezel. See "Removing the Front Bezel" on
page 49.
4
Pull the filler panel away from the chassis.
Figure 3-5.
Removing and Installing a Filler Panel
Installing a Filler Panel
1
Slide the filler panel into the bay until it clicks into place. See Figure 3-5.
2
Replace the front bezel. See "Installing the Front Bezel" on page 49.
3
Close the system. See "Closing the System" on page 51.
1
filler panel
1