Dell PowerEdge R210 II Owner's Manual - Page 66
Cooling Shroud - dimensions
View all Dell PowerEdge R210 II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
NOTE: To avoid interference with other components, the maximum allowable dimensions of the USB key are 24 mm (0.94 in) wide x 79 mm (3.11 in) long x 8.6 mm (0.33 in) high. 1 Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet. 2 Open the system. See "Opening the System" on page 50. 3 Locate the USB connector on the control panel board. See Figure 3-20. 4 Insert the USB memory key into the USB connector. 5 Close the system. See "Closing the System" on page 51. 6 Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals. Figure 3-10. Removing and Installing a USB Memory Key 1 2 1 USB memory key connector 2 USB memory key Cooling Shroud The cooling shroud covers the processor, heat sink, and memory modules, and provides airflow to these components. Airflow is facilitated by the cooling fan modules, which are positioned directly behind the cooling shroud. 66 Installing System Components