Dell PowerEdge R210 II Owner's Manual - Page 90
Press the battery straight down into the socket until it snaps into place.
View all Dell PowerEdge R210 II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
1 Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet. 2 Open the system. See "Opening the System" on page 50. Figure 3-19. Replacing the System Battery 1 2 1 system battery 2 metal tab 3 Locate the battery socket. See Figure 6-1. CAUTION: To avoid damage to the battery connector, you must firmly support the connector while installing or removing a battery. 4 To remove the battery, push the metal tab away from the battery until the battery pops out. See Figure 3-19. 5 To install the new system battery, hold the battery with the "+" facing up, and aligned to the metal tab on the socket. 6 Press the battery straight down into the socket until it snaps into place. 7 Close the system. See "Closing the System" on page 51. 8 Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals. 90 Installing System Components