Dell PowerEdge R210 II Owner's Manual - Page 57
Removing and Installing a 3.5-Inch Hard Drive, If you have removed or replaced HDD1
View all Dell PowerEdge R210 II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Figure 3-6. Removing and Installing a 3.5-Inch Hard Drive 1 2 3 4 6 5 1 hard-drive carrier 3 hard drive 5 power cable 2 release pin 4 data cable 6 chassis tabs (4) NOTE: If you are not replacing the hard drive, remove the drive from the hard-drive carrier (see "Removing a 3.5-Inch Hard Drive From a Hard-Drive Carrier" on page 59) and replace the empty hard-drive carrier back into the drive bay. 7 If you have removed or replaced HDD1, replace the optical drive (if present) mounted above the hard-drive carrier. See "Installing an Optical Drive" on page 54. 8 Close the system. See "Closing the System" on page 51. 9 Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals. Installing System Components 57