Dell PowerSwitch S4112F-ON OS10 Enterprise Edition User Guide Release 10.4.1.0 - Page 261

Table 2. RPM on VLT scenarios Scenario Mirror an orphan port or VLT LAG or VLTi member port to VLT LAG. The packet analyzer is connected to the TOR switch. Recommendation The following is an example of recommended configuration on the peer VLT device: 1 Create RPM VLAN ! interface vlan 100 no shutdown remote-span ! 2 Create an L2 ACL for the RPM VLAN - RPM session and attach it to VLTi LAG interface. ! mac access-list rpm seq 10 permit any any capture session 10 vlan 100 ! interface ethernet 1/1/1 no shutdown switchport access vlan 1 mac access-group rpm in ! 3 Create a flow based RPM session on the peer VLT device to monitor the VLTi LAG interface as source. ! monitor session 10 type rpm-source destination remote-vlan 100 flow-based enable source interface ethernet1/1/1 (ICL lag member) ! Mirror a VLAN with VLTi LAG as member to any orphan port on the The following is an example of recommended configuration on the same VLT device. The packet analyzer is connected to the local VLT VLT device: device through the orphan port. 1 Create an L2 ACL for the local session and attach it to the VLTi LAG interface. ! mac access-list local seq 10 permit any any capture session 10 ! interface ethernet 1/1/1 no shutdown switchport access vlan 1 mac access-group local in ! 2 Create a flow based local session on the VLT device to monitor VLTi LAG interface member (ethernet 1/1/1) as source. ! monitor session 10 type destination interface ethernet 1/1/10 flowbased enable source interface ethernet1/1/1 no shut ! Mirror a VLAN with VLTi LAG as member to VLT LAG on the same - VLT device. The packet analyzer is connected to the TOR switch. Layer 2 261