Dell PowerSwitch S4112F-ON OS10 Enterprise Edition User Guide Release 10.4.1.0 - Page 328

bestpath med Changes the best path MED attributes during MED comparison for path selection. Syntax Parameters bestpath med {confed | missing-as-worst} • confed - Compare MED among BGP confederation paths. • missing-as-worst - Treat missing MED as the least preferred path. Default Command Mode Usage Information Disabled ROUTER-BGP Before you apply this command, use the always-compare-med command. The no version of this command resets the MED comparison influence. NOTE: To configure these settings for a non default VRF instance, you must first enter the ROUTERCONFIG-VRF sub mode using the following commands: 1 Enter the ROUTER BGP mode using the router bgp as-number command. 2 From the ROUTER BGP mode, enter the ROUTER BGP VRF mode using the vrf vrf-name command. Example OS10(conf-router-bgp-2)# bestpath med confed Supported Releases 10.3.0E or later bestpath router-id Ignores comparing router-id information for external paths during the best path selection. Syntax Parameters Default Command Mode Usage Information bestpath router-id {ignore} ignore - Enter to ignore AS path for best-path computation. Enabled ROUTER-BGP Select the path that you received first if you do not receive the same the router ID for multiple paths. Ignore the path information if you received the same router ID for multiple paths. The no version of this command resets the value to the default. NOTE: To configure these settings for a non default VRF instance, you must first enter the ROUTERCONFIG-VRF sub mode using the following commands: 1 Enter the ROUTER BGP mode using the router bgp as-number command. 2 From the ROUTER BGP mode, enter the ROUTER BGP VRF mode using the vrf vrf-name command. Example OS10(conf-router-bgp-2)# bestpath router-id ignore Supported Releases 10.3.0E or later 328 Layer 3