Dell PowerSwitch S4112F-ON OS10 Enterprise Edition User Guide Release 10.4.1.0 - Page 262
Port monitoring commands, description Port Monitoring
![]() |
View all Dell PowerSwitch S4112F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 262 highlights
Scenario Recommendation Mirror VLT LAG of TOR, or any port in the TOR to any orphan port - in the VLT device. Configure VLT nodes as intermediate device. The packet analyzer is connected to the TOR switch. Mirror VLT LAG to any orphan port on the same VLT device. The packet analyzer is connected to the local VLT device through the orphan port. If the packet analyzer is directly connected to the VLT peer in which the source session is configured, use local port monitoring instead of RPM. Mirror an orphan port in primary VLT device to any orphan port on - secondary VLT device through VLTi. The packet analyzer is connected to the secondary VLT device through the orphan port. In this case, the mirroring packets are duplicated. Mirror VLT LAG of the primary VLT device to any orphan port on - secondary VLT device through VLTi. The packet analyzer is connected to the secondary VLT device through the orphan port. Mirror a member port of VLTi LAG or VLT LAG to any orphan port in the same device. The packet analyzer is connected to the local VLT device through the orphan port. If the packet analyzer is directly connected to the VLT peer in which the source session is configured, use local port monitoring instead of RPM. Mirror a member port of VLTi LAG to VLT LAG on the same VLT - device. The packet analyzer is connected to the TOR switch. Mirror VLT LAG or VLT member port as part of source VLAN and - destination VLAN. The packet analyzer is connected to the TOR switch. Port monitoring commands description (Port Monitoring) Configures a description for the port monitoring session. The monitoring session can be one of the following: local, RPM, or ERPM. Syntax description string Parameters string - Enter a description of the monitoring session (up to 255 characters). Default Not configured Command Mode MONITOR-SESSION Usage Information The no version of this command removes the description text. Example OS10(conf-mon-local-1)# description remote OS10(conf-mon-rpm-source-5)# description "RPM Sesssion" OS10(conf-mon-erpm-source-10)# description "ERPM Session" Supported Releases 10.2.0E or later destination (Port Monitoring) Sets the destination where monitored traffic is sent to. The monitoring session can be local or RPM. Syntax destination {interface interface-type | remote-vlan vlan-id} 262 Layer 2
![](/manual_guide/products/dell-powerswitch-s3048on-os10-enterprise-edition-user-guide-release-10410-b76d862/262.png)