Dell PowerSwitch S4112F-ON OS10 Enterprise Edition User Guide Release 10.4.1.0 - Page 382

- For a VLAN interface, enter the keyword vlan then a number from 1 to 4093. Defaults Command Mode Usage Information None. EXEC The no version of this command resets the value to the default. Example OS10# show ipv6 neighbors IPv6 Address Expires(min) Hardware Address State Interface VLAN CPU 100::1 0.03 00:00:00:00:00:22 DELAY Te 1/12 - CP fe80::200:ff:fe00:22 232 00:00:00:00:00:22 STALE Te 1/12 - CP 500::1 0.60 00:01:e8:17:5c:af REACH Te 1/13 - CP fe80::200:ff:fe00:17 232 00:00:00:00:00:29 REACH Te 1/14 - CP 900::1 0.60 00:01:e8:17:5c:b1 STALE Po 23 - CP 400::1 0.60 00:01:e8:17:5c:ae REACH Te 1/2 Vl 100 CP OS10# Supported Releases 10.4.1.0 or later or later show ipv6 route Displays IPv6 routes. Syntax show ipv6 route [vrf vrf-name] [all | bgp | connected | static | A::B/mask | summary] Parameters • vrf vrf-name - (Optional) Enter the keyword vrf followed by the name of the VRF to display IPv6 routes corresponding to that VRF. If you do not specify this option, routes corresponding to the default VRF are displayed. • all-(Optional) Displays all routes including nonactive routes. • bgp-(Optional) Displays BGP route information. • connected-(Optional) Displays only the directly connected routes. • static-(Optional) Displays all static routes. • A::B/mask-(Optional) Enter the IPv6 destination address and mask. • summary-(Optional) Displays the IPv6 route summary. Default Command Mode Usage Information Example (All) Not configured EXEC None OS10# show ipv6 route all Codes: C - connected S - static B - BGP, IN - internal BGP, EX - external BGP O - OSPF,IA - OSPF inter area, N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2, E1 - OSPF external type 1, E2 - OSPF external type 2, > - non-active route Gateway of last resort is not set Destination Gateway Dist/Metric Last Change Example (Connected) OS10# show ipv6 route connected Codes: C - connected S - static 382 Layer 3