Dell PowerSwitch S4112F-ON OS10 Enterprise Edition User Guide Release 10.4.1.0 - Page 536
radius-server retransmit, radius-server timeout
![]() |
View all Dell PowerSwitch S4112F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 536 highlights
Parameters • hostname - Enter the host name of the RADIUS server. • ip-address - Enter the IPv4 (A.B.C.D) or IPv6 (x:x:x:x::x) address of the RADIUS server. • key 0 authentication-key - Enter an authentication key in plain text (up to 42 characters). • key 9 authentication-key - Enter an authentication key in encrypted format (up to 128 characters). • authentication-key - Enter an authentication in plain text (up to 42 characters). It is not necessary to enter 0 before the key. • auth-port port-number - (Optional) Enter the UDP port number used on the server for authentication (0 to 65535, default 1812) Default Command Mode Usage Information Example Not configured CONFIGURATION The authentication key must match the key configured on the RADIUS server. You cannot enter spaces in the key. The show running-configuration output displays both unencrypted and encrypted keys in encrypted format. Configure global settings for the timeout and retransmit attempts allowed on RADIUS servers by using the radius-server retransmit and radius-server timeout commands. The no version of this command removes a RADIUS server configuration. OS10(config)# radius-server host 1.5.6.4 key secret1 Supported Releases 10.2.0E or later radius-server retransmit Configures the number of authentication attempts allowed on RADIUS servers. Syntax Parameters Default Command Mode Usage Information Example radius-server retransmit retries retries - Enter the number of retry attempts (0 to 100). An OS10 switch retransmits a RADIUS authentication request three times. CONFIGURATION Use this command to globally configure the number of retransmit attempts allowed for authentication requests on RADIUS servers. The no version of this command resets the value to the default. OS10(config)# radius-server retransmit 50 Supported Releases 10.2.0E or later radius-server timeout Configures the timeout used to resend RADIUS authentication requests. Syntax radius-server timeout seconds Parameters seconds - Enter the time in seconds for retransmission (0 to 1000). Default An OS10 switch stops sending RADIUS authentication requests after five seconds. Command Mode CONFIGURATION Usage Information Use this command to globally configure the timeout value used on RADIUS servers. The no version of this command resets the value to the default. 536 System management
![](/manual_guide/products/dell-powerswitch-s3048on-os10-enterprise-edition-user-guide-release-10410-b76d862/536.png)