Dell PowerSwitch S4112F-ON OS10 Enterprise Edition User Guide Release 10.4.1.0 - Page 362

ip address Configures IP address to an interface. Syntax Parameters Defaults Command Mode Usage Information Example ip address ip-address/mask ip-address/mask - Enter the IP address. None INTERFACE The no version of this command removes the IP address set for the interface. OS10(config)# interface ethernet 1/1/1 OS10(conf-if-eth1/1/1)# ip address 10.1.1.0/24 Supported Releases 10.3.0E or later ip address dhcp Enables DHCP client operations on the interface. Syntax Parameters Defaults Command Mode Usage Information Example ip address dhcp None None INTERFACE The no version of this command disables the DHCP operations on the interface. OS10(config)# interface mgmt 1/1/1 OS10(conf-if-ma-1/1/1)# ip address dhcp Supported Releases 10.3.0E or later ip arp Configures static ARP and maps the IP address of the neighbor to a MAC address. Syntax ip arp mac-address Parameters mac-address - Enter the MAC address of IP neighbor in A.B.C.D format. Default Not configured Command Mode INTERFACE Usage Information Do not use Class D (multicast) or Class E (reserved) IP addresses. Zero MAC addresses (00:00:00:00:00:00) are also invalid. The no version of this command disables IP ARP configuration. Example OS10(conf-if-eth1/1/6)# ip arp 10.1.1.5 08:00:20:b7:bd:32 Supported Releases 10.2.0E or later 362 Layer 3