Dell PowerSwitch S4112F-ON OS10 Enterprise Edition User Guide Release 10.4.1.0 - Page 476

! vrrp-group 1 priority 200 virtual-address 10.1.1.1 ! interface ethernet1/1/2 switchport access vlan 1 no shutdown ! interface ethernet1/1/3 switchport access vlan 1 no shutdown ! interface ethernet1/1/4 switchport access vlan 1 no shutdown ! interface ethernet1/1/5 switchport access vlan 1 no shutdown ! interface ethernet1/1/6 switchport access vlan 1 no shutdown interface vlan1 no shutdown ! interface mgmt1/1/1 no shutdown ! support-assist ! track 10 track-interface ethernet1/1/1 VRRP commands advertise-interval Sets the time interval between VRRP advertisements. Syntax advertise-interval [seconds | centisecs centisecs] Parameters • seconds - Set the advertise interval in seconds (1 to 255). • centisecs centisecs - (Optional) Enter a value in multiples of 25 (25 to 4075). Default Command Mode Usage Information Example 1 second or 100 centisecs INTERFACE-VRRP Dell EMC recommends keeping the default setting for this command. If you do change the time interval between VRRP advertisements on one router, change it on all routers. The no version of this command sets the VRRP advertisements timer interval back to its default value (1 second or 100 centisecs). OS10(conf-eth1/1/6-vrid-250)# advertise-interval 120 centisecs 100 Supported Releases 10.2.0E or later 476 Layer 3