Dell PowerSwitch S4112F-ON OS10 Enterprise Edition User Guide Release 10.4.1.0 - Page 494

aaa authentication system:local ip domain-name dell.com ip domain-list f10.com ip name-server 1.1.1.1 2::2 ip host dell-f10.com 10.10.10.10 snmp-server community public read-only snmp-server contact http://www.dell.com/support/ snmp-server location United States debug radius false DHCP commands default-router address Assigns a default gateway to clients based on the IP address pool. Syntax Parameters default-router address [address2...address8] • address - Enter an IPv4 or IPv6 address to use as the default gateway for clients on the subnet in A.B.C.D or A::B format. • address2...address8 - (Optional) Enter up to eight IP addresses, in order of preference. Default Command Mode Usage Information Example Not configured DHCP-POOL Configure up to eight IP addresses, in order of preference. Use the no version of this command to remove the configuration. OS10(conf-dhcp-20.1.1.1)# default-router 20.1.1.100 Supported Releases 10.2.0E or later disable Disables the DHCP server. Syntax disable Parameters None Default Disabled Command Mode DHCP Usage Information The no version of this command enables the DHCP server. Example OS10(conf-dhcp)# no disable Supported Releases 10.2.0E or later 494 System management