Dell PowerSwitch S4112F-ON OS10 Enterprise Edition User Guide Release 10.4.1.0 - Page 727
D1conf-if-po-10# vlt-port-channel 10, D1config# interface port-channel 10
![]() |
View all Dell PowerSwitch S4112F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 727 highlights
C1(conf-vlan100-vrid-10)# priority 250 C1(conf-vlan100-vrid-10)# virtual-address 10.10.100.5 • Configure VLT port channel for VLAN 100: C1(config)# interface port-channel 10 C1(conf-if-po-10)# vlt-port-channel 10 C1(conf-if-po-10)# switchport mode trunk C1(conf-if-po-10)# switchport trunk allowed vlan 100 C1(conf-if-po-10)# exit • Add members to port channel 10: C1(config)# interface ethernet 1/1/3 C1(conf-if-eth1/1/3)# channel-group 10 C1(conf-if-eth1/1/3)# exit C1(config)# interface ethernet 1/1/4 C1(conf-if-eth1/1/4)# channel-group 10 C1(conf-if-eth1/1/4)# exit • Configure OSPF on L3 side of core router: C1(config)# router ospf 100 C1(conf-router-ospf-100)# exit C1(config)# interface vlan 200 C1(conf-if-vl-200)# ip ospf 100 area 0.0.0.0 • Configure VLT port channel for VLAN 200: C1(config)# interface port-channel 20 C1(conf-if-po-20)# vlt-port-channel 20 C1(conf-if-po-20)# switchport mode trunk C1(conf-if-po-20)# switchport trunk allowed vlan 200 C1(conf-if-po-20)# exit • Add members to port channel 20: C1(config)# interface ethernet 1/1/5 C1(conf-if-eth1/1/5)# channel-group 20 C1(conf-if-eth1/1/5)# exit C1(config)# interface ethernet 1/1/6 C1(conf-if-eth1/1/6)# channel-group 20 C1(conf-if-eth1/1/6)# exit Sample configuration of D1: • Configure VRRP on L2 links between core routers: D1(config)# interface vlan 100 D1(conf-if-vl-100)# ip address 10.10.100.2/24 D1(conf-if-vl-100)# vrrp-group 10 D1(conf-vlan100-vrid-10)# virtual-address 10.10.100.5 • Configure VLT port channel for VLAN 100: D1(config)# interface port-channel 10 D1(conf-if-po-10)# vlt-port-channel 10 D1(conf-if-po-10)# switchport mode trunk D1(conf-if-po-10)# switchport trunk allowed vlan 100 D1(conf-if-po-10)# exit • Add members to port channel 10: D1(config)# interface ethernet 1/1/3 D1(conf-if-eth1/1/3)# channel-group 10 D1(conf-if-eth1/1/3)# exit D1(config)# interface ethernet 1/1/4 D1(conf-if-eth1/1/4)# channel-group 10 D1(conf-if-eth1/1/4)# exit • Configure OSPF on L3 side of core router: D1(config)# router ospf 100 D1(conf-router-ospf-100)# exit D1(config)# interface vlan 200 D1(conf-if-vl-200)# ip ospf 100 area 0.0.0.0 • Configure VLT port channel for VLAN 200: D1(config)# interface port-channel 20 D1(conf-if-po-20)# vlt-port-channel 20 Virtual Link Trunking 727
![](/manual_guide/products/dell-powerswitch-s3048on-os10-enterprise-edition-user-guide-release-10410-b76d862/727.png)