Dell PowerSwitch S4112F-ON OS10 Enterprise Edition User Guide Release 10.4.1.0 - Page 387

ip igmp snooping mrouter Enables IGMP querier on the specified VLAN interface. Syntax Parameters Default Command Mode Usage Information Example ip igmp snooping mrouter interface interface-type interface-type-Enter the interface type details. The interface should be a member of the VLAN. Not configured VLAN INTERFACE The no version of this command removes the multicast router configuration from the VLAN member port. OS10(config)# interface vlan 100 OS10(conf-if-vl-100)# ip igmp snooping mrouter interface ethernet 1/1/1 Supported Releases 10.4.0E(R1) or later ip igmp snooping querier Enables IGMP querier processing for the specified VLAN interface. Syntax Parameters Default Command Mode Usage Information Example ip igmp snooping querier None Not configured VLAN INTERFACE The no version of this command disables the IGMP querier on the VLAN interface.. OS10(config)# interface vlan 100 OS10(conf-if-vl-100)# ip igmp snooping querier Supported Releases 10.4.0E(R1) or later ip igmp snooping query-interval Configures time interval for sending IGMP general queries. Syntax Parameters Default Command Mode Usage Information Example ip igmp snooping query-interval query-interval-time query-interval-time-Enter the interval time in seconds, ranging from 2 to 18000. 60 seconds VLAN INTERFACE The no version of this command resets the query interval to the default value. OS10(config)# interface vlan 100 OS10(conf-if-vl-100)# ip igmp snooping query-interval 120 Supported Releases 10.4.1.0 or later Layer 3 387