Dell PowerSwitch S4112F-ON OS10 Enterprise Edition User Guide Release 10.4.1.0 - Page 56

boot Configures which OS10 image to use the next time the system boots up. Syntax boot system [active | standby] Parameters • active - Reset the running partition as the next boot partition. • standby - Set the standby partition as the next boot partition. Default Command Mode Usage Information Example Not configured EXEC Use this command to configure the location of the OS10 image used to reload the software at boot time. Use the show boot command to view the configured next boot image. This command is applied immediately. OS10# boot system standby Supported Releases 10.2.0E or later commit Commits changes in the candidate configuration to the running configuration. Syntax commit Parameters None Default Not configured Command Mode EXEC Usage Information Use this command to save changes to the running configuration. Use the do commit command to save changes in CONFIGURATION mode. Example OS10# commit Example (configuration) OS10(config)# do commit Supported Releases 10.2.0E or later configure Enters CONFIGURATION mode from EXEC mode. Syntax configure {terminal} Parameters terminal - Enters CONFIGURATION mode from EXEC mode. Default Not configured Command Mode EXEC Usage Information Enter conf t for auto-completion. 56 Getting Started