Dell PowerSwitch S4112F-ON OS10 Enterprise Edition User Guide Release 10.4.1.0 - Page 447

clear ipv6 ospf statistics Clears OSPFv3 traffic statistics. Syntax clear ipv6 ospf [instance-number] statistics Parameters instance-number - (Optional) Enter an OSPFv3 instance number (1 to 65535). Default Not configured Command Mode EXEC Usage Information This command clears the OSPFv3 traffic statistics in a specified instance or in all the configured OSPFv3 instances, and resets them to zero. Example OS10# clear ipv6 ospf 100 statistics Supported Releases 10.4.0E(R1) or later default-information originate Generates and distributes a default external route information to the OSPFv3 routing domain. Syntax default-information originate [always] Parameters always - (Optional) Always advertise the default route. Defaults Disabled Command Mode ROUTER-OSPFv3 Usage Information The no version of this command disables the distribution of default route. Example OS10(config)# router ospfv3 100 OS10(config-router-ospfv3-100)# default-information originate always Supported Releases 10.3.0E or later ipv6 ospf area Attaches an interface to an OSPF area. Syntax Parameters ipv6 ospf process-id area area-id • process-id-Enter an OSPFv3 process ID for a specific OSPFv3 process (1 to 65535). • area-id-Enter the OSPFv3 area ID in dotted decimal format (A.B.C.D) or enter an area ID number (1 to 65535). Default Command Mode Usage Information Example Not configured INTERFACE The no version of this command removes an interface from an OSPFv3 area. OS10(config)# interface vlan 10 OS10(conf-if-vl-10)# ipv6 ospf 10 area 1 Supported Releases 10.3.0E or later Layer 3 447