Dell PowerSwitch S4112F-ON OS10 Enterprise Edition User Guide Release 10.4.1.0 - Page 335

distribute-list Distributes BGP information through an established prefix list. Syntax Parameters distribute-list prefix-list-name {in | out} • prefix-list-name-Enter the name of established prefix list. • in-Enter to distribute inbound traffic. • out-Enter to distribute outbound traffic. Defaults Command Modes None ROUTER-BGP-NEIGHBOR-AF ROUTER-TEMPLATE-AF Usage Information Example The no version of this command removes the route-map. OS10(conf-router-neighbor)# address-family ipv4 unicast OS10(conf-router-bgp-neighbor-af)# distribute-list inbgg in OS10(conf-router-template)# address-family ipv4 unicast OS10(conf-router-bgp-template-af)# distribute-list outbgg out Supported Releases 10.4.1.0 or later bgp default local-preference Changes the default local preference value for routes exchanged between internal BGP peers. Syntax default local-preference number Parameters number - Enter a number as the metric to assign to routes as the degree of preference for those routes. When routes compare, the route with the higher degree of preference or the local preference value is most preferred, from 1 to 4294967295. Default 100 Command Mode ROUTER-BGP Usage Information All routers apply this command setting within the AS. The no version of this command removes local preference value. Example OS10(conf-router-bgp-1)# default local-preference 200 Supported Releases 10.3.0E or later ebgp-multihop Allows EBGP neighbors on indirectly connected networks. Syntax ebgp-multihop hop count Parameters hop count - Enter a value for the number of hops, from 1 to 255. Layer 3 335