Dell PowerVault MD3260i CLI Guide - Page 16
password, all output text that is a result of running the script
View all Dell PowerVault MD3260i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Parameter -i -m -n -o -p -q 16 Definition • eventOnly- Only event information is included in the e-mail. • profile- Event and array profile information is included in the e-mail. • supportBundle- Event and support bundle information is included in the e-mail. NOTE: You can enter only one information argument each time you execute the command. If you want all of the information, you must run the command three times. Use with the -d parameter to display the IP address of the known storage arrays. Use to specify the host name or IP address of the e-mail server from which to send e-mail alert notifications. Use to specify the name of the storage array on which to run the script commands. This name is optional when you use host‑name-or-IP-address; however, if you are using the in-band method for managing the storage array, you must use the -n parameter if more than one storage array is connected to the host at the specified address. The storage array name is required when host‑nameor-IP-address is not used; however, the name of the storage array configured for use in the MD Storage Manager GUI (that is, listed in the configuration file) must not be a duplicate name of any other configured storage array. Use with the -c or -f parameter to specify a file name for all output text that is a result of running the script commands. Use to specify the password for the storage array on which to run commands. A password is not necessary under the following conditions: • A password has not been set on the storage array. • The password is specified in a script file that is running. • The storage array password is specified by using the -c parameter and the set session password=password command. Use to specify how frequently to include additional profile or support bundle information in the e-mail alert notifications. An e-mail alert notification that contains at least the basic event information is always generated for every critical event. If you set the-I parameter to eventOnly, the only valid argument for -q is