Dell PowerVault MD3260i CLI Guide - Page 181

Parameter schedule rollbackPriority Description Use this parameter to schedule a snapshot operation, with the following options: • immediate • startDate • scheduleDay • startTime • scheduleInterval • endDate • noEndDate • timesPerDay • timeZone For more information, see Scheduling Snapshots. Determines whether system resources must be allocated to the rollback operation at the expense of system performance. A value of 0 indicates that the rollback operation is prioritized over all other host I/O. A value of 4 indicates that the rollback operation must be performed with minimal impact to the host I/O. NOTE: When you use this command, you can specify one or more of the optional parameters. You can use any combination of alphanumeric characters, hyphens, and underscores for the names. Names can have a maximum of 30 characters. NOTE: You can set the warningThresholdPercent parameter and the repositoryFullPolicy parameter for both the snapshot repository virtual disk or the snapshot virtual disk. Set Storage Array This command defines the properties of the storage array. Syntax set storageArray autoSupportConfig (enable | disable) | cacheBlockSize=cacheBlockSizeValue | cacheFlushStart=cacheFlushStartSize | cacheFlushStop=cacheFlushStopSize | defaultHostType=("hostTypeName" | hostTypeIdentifier) failoverAlertDelay=delayValue | mediaScanRate=(disabled | 1-30) | password="password" | userLabel="storageArrayName") isnsRegistration=(TRUE | FALSE) Parameters Parameter autoSupportConfig Description The setting for automatically collecting support data each time the firmware detects a critical MEL event. This parameter has these values: 181