Dell PowerVault MD3260i CLI Guide - Page 161

Parameter forceSave Description (starting with the last event entered) are saved to the file. Use integer values. When set to TRUE, force saves all critical events to a file. Default value is FALSE. Save Storage Array iSCSI Statistics This command saves the iSCSI performance of the storage array to a file. The following statistics are saved to the file: • Statistics related to the physical Ethernet port • Statistics related to the TCP protocol • Statistics related to the IP protocol Syntax save storageArray iscsiStatistics [raw | baseline] file="filename" Parameters Parameter raw baseline file Description This parameter defines that the statistics collected are all statistics from the RAID controller module start‑of‑day. Enclose the parameter in square brackets ([ ]). This parameter defines that the statistics collected are all statistics from the time the RAID controller modules were reset to zero using the reset storageArray iscsiStatsBaseline command. Enclose the parameter in square brackets ([ ]). The name of the file to which you want to save the performance statistics. Enclose the file name in double quotation marks (" "). NOTE: This command does not automatically append a file extension to the new file. You must specify the file extension when you enter the file name. NOTE: If you have not reset the iSCSI baseline statistics since the RAID controller module start‑of‑day, the time at the start‑of‑day is the default baseline time. Save Storage Array Performance Statistics This command saves the performance statistics to a file. Before you use this command, issue the set session performanceMonitorInterval and set session performanceMonitorIterations commands to specify how often statistics are collected. Syntax save storageArray performanceStats file="filename" Parameter 161