Dell PowerVault MD3260i CLI Guide - Page 195

Parameter allPhysicalDisks driveMediaType physicalDiskType physicalDisk or physicalDisks summary Description Returns information about all physical disks in the storage array. NOTE: To determine information about the type and location of all physical disks in the storage array, use the allPhysicalDisks parameter. retrieve information. Valid physical disk media are these: • HDD-Use this option when you have hard physical disks • in the expansion enclosure. • SSD-Use this option when you have solid state physical disks in the expansion enclosure. • unknown-Use if you are not sure what types of physical disk media are in the expansion enclosure. • allMedia - Use this option when you want to use all types of physical disk media that are in the expansion enclosure. The type of physical disk for which you want to retrieve information. The valid physical disk type is SAS. Identifies the enclosure and slot where the physical disk resides. You can enter enclosure IDs and slot IDs for one or several physical disks. Enclosure ID values are 0 to 99. Slot ID values are 0 to 31. You must put parentheses around the enclosure ID values and the slot ID values. Returns the status, capacity, data rate, product ID, and firmware version for the specified physical disks. NOTE: To determine the type of physical disk in a specific location, use the physicalDisk parameter, and enter the enclosure and slot IDs for the physical disk. Show Physical Disk Channel Statistics This command shows cumulative physical disk channel data transfer and error information. If the RAID controller module has automatically degraded a channel, this command also shows interval statistics. When using this command, you can display information about one specific physical disk channel, several physical disk channels, or all physical disk channels. Syntax show (physicalDiskChannel [(1 | 2)] | physicalDiskChannels [1 2] | allPhysicalDiskChannels) stats Parameters 195