Dell PowerVault MD3260i CLI Guide - Page 168

Parameter criticalPriority backgroundPriority Description percent. For best operation, the value for this parameter must be less than the value for the criticalThreshold parameter. Setting this parameter to 0 disables warning alerts. This parameter governs the priority for critical reconstruction activities on the disk pool. This parameter governs the priority for background task activities on the disk pool. Set Enclosure Attribute This command sets user-defined attributes for an enclosure. Syntax set enclosure [enclosureID] (chassisName | assetTag)= "userID" Parameters Parameter Description enclosureID Identifies a specific enclosure for which to set the attribute. Enclosure ID values are 0 to 99. You must put brackets ([ ]) around the enclosure ID value. chassisName Chassis name or number to give the new enclosure. Chassis names can be any combination of alphanumeric characters with a maximum length of 32 characters. Alphabetical characters can be uppercase or lowercase. You can also use the underscore character (_) and the hyphen (‑) character. You cannot use spaces in a chassis name. You must put quotation marks (" ") around the chassis name. assetTag Asset tag name or number to give the new enclosure. Asset tags can be any combination of alphanumeric characters with a maximum length of ten characters. Alphabetical characters can be uppercase or lowercase. You can also use the underscore character (_) and the hyphen (‑) character. You cannot use spaces in an asset tag name. You must put quotation marks (" ") around the asset tag name. Set Enclosure Identification This command sets the ID of an enclosure in a storage array. Syntax set enclosure ["Service Tag"] id=enclosureID Parameters 168