Dell PowerVault MD3260i CLI Guide - Page 184
Set Storage Array ICMP Response, Set Storage Array iSNS Server IPv4 Address
View all Dell PowerVault MD3260i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
Parameter Parameter enclosurePostions Description A list of all of the enclosure IDs. The sequence of the enclosure IDs in the list defines the positions for the RAID enclosure and the expansion enclosures in a storage array. Valid values are 0 to 99. Enter the enclosure ID values separated by a space. Enclose the list of enclosure ID values in parentheses. For storage arrays where the RAID enclosure has a predefined identifier that is not in the range of valid enclosure position values, use the controller value. Additional Information This command defines the position of an enclosure in a storage array by the position of the enclosure ID in the enclosurePositions list. For example, if you have a RAID enclosure with an ID set to 84 and expansion enclosures with IDs set to 1, 12, and 50, the enclosurePositions sequence (84 1 12 50) places the RAID enclosure in the first position, expansion enclosure 1 in the second position, expansion enclosure 12 in the third position, and expansion enclosure 50 in the fourth position. The enclosurePositions sequence (1 84 50 12) places the RAID enclosure in the second position, expansion enclosure 1 in the first position, expansion enclosure 50 in the third position, and expansion enclosure 12 in the fourth position. NOTE: You must include all of the enclosures in the storage array in the list defined by the enclosurePositions parameter. If the number of enclosures in the list does not match the total number of enclosures in the storage array, an error message is shown. Set Storage Array ICMP Response This command returns the default values for negotiable settings for sessions and connections, which represent the starting point for the storage array for negotiations. Syntax set storageArray icmpPingResponse=(TRUE | FALSE) Parameter Parameter Description icmpPingResponse This parameter turns on or turns off Echo Request messages. Set the parameter to TRUE to turn on Echo Request messages. Set the parameter to FALSE to turn off Echo Request messages. Set Storage Array iSNS Server IPv4 Address This command sets the configuration method and address for an IPv4 Internet Storage Name Service (iSNS). Syntax set storageArray isnsIPv4ConfigurationMethod=[static | dhcp] isnsIPv4Address=ipAddress Parameter 184