Dell PowerVault MD3260i CLI Guide - Page 162

Parameter file Description Specifies name of the file to which to save the performance statistics. You must put quotation marks (" ") around the file name. Save Storage Array SAS PHY Counts This command saves the storage array SAS physical layer (SAS PHY) counters to a file. To reset the SAS PHY counters, run the Reset Storage Array SAS PHY Baseline command. See Reset Storage Array SAS PHY Baseline. Syntax save storageArray SASPHYCounts file="filename" Parameter Parameter Description file Specifies the file path and the file name to which you save the SAS PHY counters. Enclose the file path and the file name in double quotation marks (" "). For example: file="C: \Program Files\CLI\logs\sasphy.csv" This command does not automatically append a file extension to the saved file. Any file name is acceptable, but the .csv extension must be used. Save Storage Array State Capture This command saves the state capture to a file. Syntax save storageArray stateCapture file="filename" Parameter Parameter file Description Name of the file to which to save the state capture. You must put quotation marks (" ") around the file name. Save Storage Array Support Data This command saves the storage array support-related information to a file. Support-related information includes: • The storage array profile • The Major Event Log information • The NVSRAM data • Current problems and associated recovery information • The performance statistics for the entire storage array • The persistent registration information and the persistent reservation information • Detailed information about the current status of the storage array • The diagnostic data for the physical disk 162