Dell Studio Hybrid D140G Studio Hybrid Service Manual - Page 14

Back to Contents Page Replacing the Computer Cover Dell™ Studio Hybrid Service Manual Removing the Computer Cover Installing the Computer Cover Removing the Computer Cover CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. CAUTION: To guard yourself against an electrical shock, always unplug your computer from the electrical outlet before removing the cover. NOTICE: Ensure that sufficient space exists to support the system with the cover removed-at least 30 cm (1 ft.) of desktop space. 1. Follow the procedures in Before You Begin. 2. Remove the stand by lifting the computer from the stand. 3. Place the computer horizontally and remove the screw. NOTICE: To avoid scratches during this procedure, place the computer on a mat. 4. Place the computer vertically and pull the sleeve gently towards the back of your computer.