Dell Vostro 15 3510 Service Manual - Page 25
Disconnecting the battery cable, Steps, Next steps, Prerequisites
![]() |
View all Dell Vostro 15 3510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Steps 1. Place the battery on the palm-rest and keyboard assembly. 2. Align the screw holes on the battery to the screw holes on the palmrest and keyboard assembly. 3. Replace the three screws (M2x3) that secure the battery to the palmrest and keyboard assembly. 4. Connect the battery cable to the connector on the system board. Next steps 1. Install the base cover. 2. Install the SD card. 3. Follow the procedure in after working inside your computer. Disconnecting the battery cable Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the SD card. 3. Remove the base cover. Removing and installing components 25
![](/manual_guide/products/dell-vostro-15-3510-service-manual-dd07815/25.png)
Steps
1.
Place the battery on the palm-rest and keyboard assembly.
2.
Align the screw holes on the battery to the screw holes on the palmrest and keyboard assembly.
3.
Replace the three screws (M2x3) that secure the battery to the palmrest and keyboard assembly.
4.
Connect the battery cable to the connector on the system board.
Next steps
1.
Install the
base cover
.
2.
Install the
SD card
.
3.
Follow the procedure in
after working inside your computer
.
Disconnecting the battery cable
Prerequisites
1.
Follow the procedure in
before working inside your computer
.
2.
Remove the
SD card
.
3.
Remove the
base cover
.
Removing and installing components
25