Dell Vostro 15 3510 Service Manual - Page 45

IO board, Removing the I/O board

Get Dell Vostro 15 3510 PDF manuals and user guides View all Dell Vostro 15 3510 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

Steps 1. Using the alignment posts and rubber grommets, place the speakers in the slots on the palm-rest and keyboard assembly. 2. Route the speaker cable through the routing guides on the palm-rest and keyboard assembly.. 3. Connect the speaker cable to the connector on the system board . Next steps 1. Install the base cover. 2. Exit service mode. 3. Install the SD card. 4. Follow the procedure in after working inside your computer. IO board Removing the I/O board Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the SD card. 3. Enter service mode. 4. Remove the base cover. About this task The following images indicate the location of the I/O board and provides a visual representation of the removal procedure. Removing and installing components 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
Steps
1.
Using the alignment posts and rubber grommets, place the speakers in the slots on the palm-rest and keyboard assembly.
2.
Route the speaker cable through the routing guides on the palm-rest and keyboard assembly..
3.
Connect the speaker cable to the connector on the system board .
Next steps
1.
Install the
base cover
.
2.
Exit
service mode
.
3.
Install the
SD card
.
4.
Follow the procedure in
after working inside your computer
.
IO board
Removing the I/O board
Prerequisites
1.
Follow the procedure in
before working inside your computer
.
2.
Remove the
SD card
.
3.
Enter
service mode
.
4.
Remove the
base cover
.
About this task
The following images indicate the location of the I/O board and provides a visual representation of the removal procedure.
Removing and installing components
45