Dell Vostro 15 3510 Service Manual - Page 67

Installing the camera, Display eDP cable, Removing the eDP cable

Get Dell Vostro 15 3510 PDF manuals and user guides View all Dell Vostro 15 3510 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 67 highlights

Installing the camera Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task Steps 1. Using the alignment post, adhere the camera module on the display back-cover and antenna assembly. 2. Connect the camera cable to the camera module. Next steps 1. Install the display panel. 2. Install the display bezel. 3. Install the hinge caps. 4. Install the display assembly. 5. Install the WLAN card. 6. Install the base cover. 7. Exit service mode. 8. Install the SD card. 9. Follow the procedure in after working inside your computer. Display eDP cable Removing the eDP cable Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the SD card. 3. Enter service mode. 4. Remove the base cover. 5. Remove the WLAN card. 6. Remove the display assembly. Removing and installing components 67

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
Installing the camera
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
Steps
1.
Using the alignment post, adhere the camera module on the display back-cover and antenna assembly.
2.
Connect the camera cable to the camera module.
Next steps
1.
Install the
display panel
.
2.
Install the
display bezel
.
3.
Install the
hinge caps
.
4.
Install the
display assembly
.
5.
Install the
WLAN card
.
6.
Install the
base cover
.
7.
Exit
service mode
.
8.
Install the
SD card
.
9.
Follow the procedure in
after working inside your computer
.
Display eDP cable
Removing the eDP cable
Prerequisites
1.
Follow the procedure in
before working inside your computer
.
2.
Remove the
SD card
.
3.
Enter
service mode
.
4.
Remove the
base cover
.
5.
Remove the
WLAN card
.
6.
Remove the
display assembly
.
Removing and installing components
67