Dell Vostro 15 3510 Service Manual - Page 73
Power button with fingerprint reader
View all Dell Vostro 15 3510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Steps 1. Place the power-button board into the slot on the palm-rest and keyboard assembly. 2. Install the single (M2x2) screws to secure the power button to the palm-rest and keyboard assembly. Next steps 1. Install the IO board. 2. Install the base cover. 3. Exit service mode. 4. Install the SD card. 5. Follow the procedure in after working inside your computer. Power button with fingerprint reader Removing the power-button with fingerprint reader Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the SD card. 3. Enter service mode. 4. Remove the base cover. 5. Remove the IO board. About this task The following images indicate the location of the power-button with fingerprint reader and provides a visual representation of the removal procedure. Removing and installing components 73