Dell Vostro 15 3510 Service Manual - Page 46
Installing the I/O board
![]() |
View all Dell Vostro 15 3510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Steps 1. Open the latch and disconnect the fingerprint-reader board cable from the I/O board, if applicable. 2. Open the latch and disconnect the I/O-board power cable from the I/O board. 3. Remove the two (M2x3) screws that secure the I/O board to the palm-rest and keyboard assembly, and remove the I/O board from the system. 4. Remove the three (M2x3) screws that secure the I/O board to the palm-rest and keyboard assembly, and remove the I/O board from the system. Installing the I/O board Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following images indicate the location of the I/O board and provides a visual representation of the installation procedure. 46 Removing and installing components
![](/manual_guide/products/dell-vostro-15-3510-service-manual-dd07815/46.png)