Dell Vostro 15 3510 Service Manual - Page 31

Table 2. WLAN Antenna Cables, Steps, Connectors on the wireless card, Antenna-cable color, Next steps

Get Dell Vostro 15 3510 PDF manuals and user guides View all Dell Vostro 15 3510 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

Steps 1. Connect the antenna cables to the wireless card. The following table provides the antenna-cable color scheme for the wireless card supported by your computer. Table 2. WLAN Antenna Cables Connectors on the wireless card Main(white triangle) Antenna-cable color White Auxiliary(black triangle) Black 2. Slide the wireless card into the M.2 card slot on the system board. 3. Place the wireless-card bracket on the wireless card. 4. Replace the single (M2x3) screw to secure the wireless-card bracket and the wireless card to the system board. Next steps 1. Install the base cover. 2. Exit service mode. 3. Install the SD card. 4. Follow the procedure in after working inside your computer. Removing and installing components 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
Steps
1.
Connect the antenna cables to the wireless card.
The following table provides the antenna-cable color scheme for the wireless card supported by your computer.
Table 2. WLAN Antenna Cables
Connectors on the wireless card
Antenna-cable color
Main(white triangle)
White
Auxiliary(black triangle)
Black
2.
Slide the wireless card into the M.2 card slot on the system board.
3.
Place the wireless-card bracket on the wireless card.
4.
Replace the single (M2x3) screw to secure the wireless-card bracket and the wireless card to the system board.
Next steps
1.
Install the
base cover
.
2.
Exit
service mode
.
3.
Install the
SD card
.
4.
Follow the procedure in
after working inside your computer
.
Removing and installing components
31