Dell Vostro 15 3510 Service Manual - Page 39
Heat sink, Removing the heat sink - UMA
View all Dell Vostro 15 3510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Steps 1. Align and place the fan on the palm-rest and keyboard assembly. 2. Replace the two screws (M2x5) to secure the fan to the palm-rest and keyboard assembly. 3. Connect the fan cable to the connector on the system board . Next steps 1. Replace the base cover. 2. Exit service mode. 3. Replace the SD card. 4. Follow the procedure in after working inside your computer. Heat sink Removing the heat sink - UMA Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the SD card. 3. Enter service mode. 4. Remove the base cover. About this task The following images indicate the location of the heat sink and provides a visual representation of the removal procedure. Removing and installing components 39
Steps
1.
Align and place the fan on the palm-rest and keyboard assembly.
2.
Replace the two screws (M2x5) to secure the fan to the palm-rest and keyboard assembly.
3.
Connect the fan cable to the connector on the system board .
Next steps
1.
Replace the
base cover
.
2.
Exit
service mode
.
3.
Replace the
SD card
.
4.
Follow the procedure in
after working inside your computer
.
Heat sink
Removing the heat sink - UMA
Prerequisites
1.
Follow the procedure in
before working inside your computer
.
2.
Remove the
SD card
.
3.
Enter
service mode
.
4.
Remove the
base cover
.
About this task
The following images indicate the location of the heat sink and provides a visual representation of the removal procedure.
Removing and installing components
39