Dell Vostro 15 3510 Service Manual - Page 76
System board, System board connectors, Removing the system board
![]() |
View all Dell Vostro 15 3510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Next steps 1. Install the IO board. 2. Install the base cover. 3. Exit service mode. 4. Install the SD card. 5. Follow the procedure in after working inside your computer. System board System board connectors The following image shows the different connectors on the system board. 1. Fan connector 2. IO board FFC connector 3. eDP connector 4. DC-in port connector 5. Keyboard FFC connector 6. Backlit FFC connector 7. Memory module connectors 8. Battery connector 9. Touchpad FFC connector 10. Hard-drive FFC connector 11. WLAN connector 12. Speaker cable connector 13. SSD connector Removing the system board Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the SD card. 76 Removing and installing components
![](/manual_guide/products/dell-vostro-15-3510-service-manual-dd07815/76.png)
Next steps
1.
Install the
IO board
.
2.
Install the
base cover
.
3.
Exit
service mode
.
4.
Install the
SD card
.
5.
Follow the procedure in
after working inside your computer
.
System board
System board connectors
The following image shows the different connectors on the system board.
1.
Fan connector
2.
IO board FFC connector
3.
eDP connector
4.
DC-in port connector
5.
Keyboard FFC connector
6.
Backlit FFC connector
7.
Memory module connectors
8.
Battery connector
9.
Touchpad FFC connector
10.
Hard-drive FFC connector
11.
WLAN connector
12.
Speaker cable connector
13.
SSD connector
Removing the system board
Prerequisites
1.
Follow the procedure in
before working inside your computer
.
2.
Remove the
SD card
.
76
Removing and installing components