Dell XPS Owners Manual - Page 107
Jumper Settings, Boot Device Menu, USB Flash Device, Boot Sequence
View all Dell XPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
4 At the Boot Device Menu, use the up- and down-arrow keys or press the appropriate number on the keyboard to highlight the device that is to be used for the current boot only, and then press . For example, if you are booting to a USB memory key, highlight USB Flash Device and press . NOTE: To boot to a USB device, the device must be bootable. To make sure your device is bootable, check the device documentation. Changing Boot Sequence for Future Boots 1 Enter system setup (see "Entering System Setup" on page 102). 2 Press the arrow keys to highlight the Boot Sequence menu option and press to access the menu. NOTE: Write down your current boot sequence in case you want to restore it. 3 Press the up- and down-arrow keys to move through the list of devices. 4 Press the spacebar to enable or disable a device (enabled devices have a checkmark). 5 Press the key or the key to move a selected device up or down the list. Jumper Settings Specifications 107