Epson ActionNote 650C User Manual - Page 89
Error Messages, The Computer Won't Start, Won't Start
View all Epson ActionNote 650C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Error Messages Your computer's built-in memory (ROM) contains a series of diagnostic programs, called power-on diagnostics, which your computer runs automatically every time you turn it on. These programs check internal devices such as ROM, RAM, the timer, the keyboard controller, and the hard disk drive. When the diagnostics test RAM, you can see the total amount of memory currently installed in your system. If the computer finds an error, it displays an error message on the screen. Write down the message and give it to the person who is helping you when you report the problem. If the error is serious, the computer cancels further checking and halts system initialization. The error message remains on the screen and the computer locks up. If this happens, contact your Authorized EPSON Servicer or the EPSON Connection to report the problem. The Computer Won't Start If your computer does not start when you press the power button, try the following: 1. Check the AC Power, Battery Charging, and Battery Status icons. See Chapter 3 for a description of these icons. 2. Press the power button to turn off the computer. (You need to press the power button for two second s.) If you are using the battery, remove it and reinstall it. If you are using the AC adapter, disconnect it and then reconnect it. Then turn the power on again. Troubleshooting 5-3