Epson PhotoPC 3100Z User Manual - Page 37

Taking Pictures With the Timer Setting the timer creates a 10-second delay between the time you press the shutter button and the actual image capture. This allows you to take a picture of yourself. NOTE You can also use continuous or interval shooting, or video clip capture with the timer for delayed automatic capture of images. This allows you to photograph yourself in motion. See Chapter 3 for more information. To take a single picture with the timer: 1 Secure the camera on a flat surface or on a tripod. (See page B-4 for information on attaching the camera to a tripod.) 2 Turn the camera's dial to or . Then wait until the photo capture light stops flashing and remains a steady green. 3 Press the timer button on the top of the camera. The timer icon appears in the status display panel. timer 4 Press the shutter button all button the way down. The timer icon and the red timer light on the front of the camera flash slowly for eight seconds. Then they flash rapidly for two seconds before the shutter is released. If camera sounds are enabled, the camera beeps ten times. (See page 7-3 to enable camera sounds.) NOTE To cancel a timer picture after you've pressed the shutter button, press the shutter button again, or press the timer button. The camera clicks when the image is captured. The photo capture light on the back of the camera flashes green as the PhotoPC 3100Z processes the image. Taking Pictures 2-12