Epson TM-L90 Technical Reference - Page 126
Setting items of TM-L90 Peeler 39* models
![]() |
View all Epson TM-L90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
8: Other settings 11: Select label [Selection of the PAPER OUT LED status when a paper near-end is detected] On, Off [Recovery selection when paper layout error occurs] DLE ENQ or cover open/close DLE ENQ [Select automatic measurement of maximum length for paper] 160 mm, 300 mm [Select moving to the print starting position when power is turned on] moves to starting position does not move Setting items of TM-L90 Peeler 39* models See "Memory Switch Settings" on page 44 for the procedures for the memory switch setting mode. Setting Items Options 1st page 2nd page 3rd page * The initial setting is underlined. 1: Print Current Settings - 2: Print Density 1: 1: Density Sample 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%, 110%, 115%, Monochrome 120%, 125%, 130%, 135%, 140% 2: Density List 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%, 110%, 115%, 120%, 125%, 130%, 135%, 140% 3: Serial Interface Settings 1: Baud Rate 2: Parity 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps None, Odd, Even 3: Handshaking DTR/DSR, XON/XOFF 4: Data Bits 7 bits, 8 bits 5: Data Receive Error Print "?", Ignored 4: Paper Width 80 mm, 70 mm, 60 mm, 58 mm, 38 mm 126 Appendix
![](/manual_guide/products/epson-tml90-technical-reference-9b83b36/126.png)