Epson TM-L90 Technical Reference - Page 80
Memory Switch Setting Mode
View all Epson TM-L90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
After information printing, the Mode selection guidance is printed again. 5. To finish, turn off the power, or select "Exit and Reboot Printer". 4.1.3 Memory Switch Setting Mode Use the following procedure to start this mode. 1. Close the roll paper cover. 2. Turn on the power while pressing FEED button. Keep pressing the button until the ERROR LED comes on. After printing the current status, a Continuing self-test guidance is printed, and the PAPER OUT LED flashes. 3. Hold down the FEED button (for at least one second) to shift to Mode selection. Mode selection guidance is printed, and the PAPER OUT LED flashes. 4. After briefly (less than one second) pressing the FEED button twice, hold it down for at least one second, and then select memory switch setting mode (Customize Value Settings). A guidance for the Memory switch setting mode is printed, and the PAPER OUT LED flashes. TM-L90 TM-L90 Peeler 80 Setting/Checking Modes